Eye-Fi Share Video

Last night, I picked up an Eye-Fi Share Video SDHC memory card. I have a couple of ideas I am kicking around and this device is a large part of what would make it work.

Anyway, I went to test my card in my Cheap-as-they-get HD video camera. It works… kinda.
Both of the following photos where taken using the camera and the new memory card. The photos automagically showed up on my computer, and Picassa detected them almost immediately. So VERY cool!!!

  Brother, being Brother. This is how he lays in the living room on the floor.

 Tra-Shcan swimming around. The other two jumped the tank, so it’s just this one. I think he’s looking for his buddies.

The problem is with my ultra-cheap generic camera. It doesn’t have enough power to run both the camera and the new memory card. Every time I take a photo, the Eye-Fi connects to the network and uploads the photo. This causes the power to my camera to drop, and the camera reboots. Twice.

Other then that, it works fine. The memory card can still get the photos copied off. Video works too. The camera HATES that though, the screen goes all wonky, blacks out, fun stuff like that.

I was thinking of investing into a good video camera in the next 6 months anyhow, so compatibility with the Eye-Fi will be on the required feature list.

Helping a friend move and a challenging box-spring

Saturday, I was helping some friends move. I must say, this was the best ‘hard move’ I have ever helped with. There where stairs and hard corners at both locations. A lot of big, heavy, and fragile stuff. We filled a cattle trailer and several vehicles with stuff.

What made it so easy was that everything was already packed up, and we had a ton of people!

We did have a slight problem with the queen sized box spring though. It was too big. It wouldn’t go up the stairs. So after most people left, three of us declared war on this stubborn item, and pushed really hard. We got it up the stairs!

Moving using a cattle trailer works wellCVS is looking to start unpacking the cattle trailer we moved most of the stuff in. Actually, it’s a good moving trailer, I was quite surprised.
The Box Spring wouldn’t fit up the steps, so Scott started to take the trim off the walls to see if we could gain enough extra clearance to get it through. Nope.
With some modifications to the bed as well as the ceiling, we where able to get it to fit. We had to take a small chunk out. The trim covers the hole, so it will be invisible when done.
Here you can see the box spring. We unstapled the covering, rolled it back and attacked it with a pry bar and saws-all. We took the one side board right off, and cut all the cross members as close to the edge of the springs as we dared. We could hook the first and last boards around the ceiling, but needed to push hard to get the cut bits through our slot we cut.
We replaced the factory board with a much wider board that we screwed on so it presented the same bottom profile as the original. The extra width let us screw to the shorter cross members.
Tracing the ends so the round corners are the same, and using a wood rasp to make it so the cloth was easier to pull back over, we now have a solid bottom again.
All put back together, as good as new! Better even, because now it’s upstairs instead of stuck downstairs.

Stolen GPS

Last night my GPS was stolen out of my trucklet.

Entirely my fault to!
I had picked up a few essentials at WalMart, unlocked all the doors and put them in the back seat. I was waiting on a guy to get home so I could pick up an Oscar fish from FreeCycle. I called him, still at work, so I decided to wander around Walmart to kill some time until he got off work.
I locked my door how I always do. The lock touches my knuckle when I open the door, so I just lock it as I push the door open. Quick, Easy, and I always lock the door when I get out of my vehicle. The trucklet locks all the doors every time you drive it, so all is good in the world. Except, I had unlocked all doors since I had last driven. DOH!
Somebody musta tried the passenger side door and grabbed my GPS. Nothing else. Not the Nokia 770, bluetooth headsets, power inverter, winter coat with radio scanner, FM power transmitter, etc. Just the GPS.
I called the cops, filed a report. We where hoping that Walmart security camera got it on film. Nope.
I went home to get the serial number so they could check with craigslist & pawnshops.
You know how I am a packrat. I keep everything. Boxes included. Wouldn’t you know, I tossed the box a month ago? I kept all the paperwork, expecting the serial number and such to be on the warranty card, etc. No card, no serial number. How frustrating.
There could be several lessons learned here:
  • Don’t leave GPS out in plain site
  • Always lock all the doors and not just mine
  • Never, ever throw anything away. Ever. I always seem to need it a month later.
  • Keep a google spreadsheet document with all the serial numbers of all the electronics I have.

So, I have a problem and I intend to fix it.

Wouldn’t it be cool if the GPS could tell me where it is.
Wouldn’t it be cool if I could take my own photo of the theif?

This got me to thinking…

I’ve been wanting to build a security system for my trucklet ever since the ‘OEM’ unit was installed in mine. It royaly sucks!

I haven’t done it because it would be pretty spendy – I really want a cell based internet connection for it so I can ask the truck where it is, it can tell me where it is, and send me photos of who’s driving it, etc. I can’t justify $50 a month for a internet connection even if I can use google maps on the fly on a computer I would replace the stereo with.

A little thinking ‘outside’ the box, I think I found my solution. It’s 2 peices, but I didn’t find anybody that has put them together like I want to.

An Eye-Fi Pro is an SDHC memory card with a built wi-fi card. It will take photos that are saved to it, geocode them, and upload them. How cool is that? You don’t have to stick the card into the computer to get your photos.
For $15 a year, it will connect to a paid, public wifi connections including the ones at McDonalds. My data-plan woes are now addressed, $15 a year is very reasonable!

The other half is the camera. A search revealed the following.

A Defender STEALTH1 Covert Security DVR w/ Hidden Surveillance Camera. It is a motion detector with a built in camera. It can take photos and video which it saves the the memory card.

The freaking awesomeness comes when you combine the two together. You now have a motion detection surveillance camera that automatically uploads photos to a place where you can see them when your away from home. No wires to run half way across the house, just plug it into the nearest power outlet. It can email, text, or even twitter you when it’s triggered. It runs for 17 hours on battery if the power goes out. Put your modem and router on a battery back up, and your set!

How sweet is that?

I got to thinking, all the motion detector is, is a hunter’s trail camera in a house-friendly looking enclosure.

I can get one of these for the trucklet instead. I was going to shell the camera unit out and install it into the dash anyhow, so why not use a cheaper camera that does the same thing?

So, for around $260 I can either build a really slick house security camera or one that I can cut into the dash of my trucklet that works anywhere.



  • Nice looking ‘normal’ security motion sensor.
  • Automatic uploading of photos/video using home network.
  • Ability to view photos even if home computer or security camera itself is stolen!
  • Notification of events via email, text, twitter.



  • Less expensive camera that I can take apart to install into vehicle
  • Automatic uploading of photos/video using home network or any of 10,000 public wifi accesspoints.
  • Geocoding of photos.
  • Ability to view photos even if they steal the vehicle – they just need to slowly drive/park near a wifi access point.
  • Notification of events via email, text, twitter.

Now, to find a few extra hundred dollars, because I need a GPS, a couple of motion camera, and a couple of memory cards….