Do It Yourself CO2 Reactor Construction Details

As promised, here are some more details on the construction of my Home Made CO2 Reactor. This CO2 Reactor is made from a couple of aquarium siphons, and an airline tubing splice connector.

I drilled a hole in the top Siphon Cap the same size as the airline tubing splice connector. I chose to drill the hole as close to the edge of the ridged plastic in hopes that I can give the connection some mechanical strength. I left as much room as I could so there would be enough surface area to make a watertight connection.

Here I am drilling a hole through the plastic siphon hose after I had slipped it back onto the end of the siphon cap. This hole is the same size as the inside of the plastic airline splice peice. I wanted the rubbery hose to form a tight seal around the airline splice.

After a lot of cleaning of the burs in the hose and pushing hard, I finally got the splice to fit inside the hole.

I made an improvised clamp system out of 3 nylon zip ties to hold this whole area toghether. This area leaked a little bit, so I ended up wrapping another zip tie around the elbow of the airline tubing and the siphon tube, to press the airline tubing more tightly against the rubbery hose in hopes of creating a better seal. The water leak seems to have stopped.

In looking at how the completed arrangement thing functions, I may move the airline tubing down into the larger part of the siphon tube. With the airline tubing fitting where it currently is in the hose, a lot of water preasure is trying to make the whole thing leak. I think by moving the airline fitting out of the hose, and into the larger tube, where there is mostly gas as opposed to moving water, I can eleminate the chance of this fitting creating a leak. I also think that I would be able be able to change out one of my Yeast & Sugar CO2 bottles without water trying to flow down the airline tubes when the whole thing is mounted higher then the water level on the fish tank. Posted by Picasa

Home Made CO2 Reactor

My friend Matt flew in yesterday from Arizona. We ended up going to Big Al’s pet store. We where looking at the planted tank accessories, and noticed that they want $130 for a CO2 Reactor. We put one together for under $40.

A CO2 Reactor is a device used with planted tanks that will help push Carbon Dioxide into the aquarium water. Plants LOVE carbon dioxide. It is a major fertilizer.

Here are the $40 worth of parts I needed to make my Homemade CO2 Reactor. These parts include a couple of Siphon aquarium Cleaners, some Bio-Balls, airline tubing and couplers, and an Eheim Filter part I used for a water line splice.

We disasembled one of the aquarium siphons and attached the hose to the other siphon. These are Python brand siphons, they are fitted by compression – no glue, so just pull hard, they will come apart. There are enough bio-balls inside to completely fill the tube.

Here Matt and I are leak-testing the Do It Yourself CO2 Reactor in my bathroom. We hooked it up to my Ehiem Canistor Filter, ran it into a bucket of water, and turned it on. Can you believe? It works! Only a minor leak too!

Here you can see the CO2 Reactor installed on my fish tank. I wanted it to be visable, so I mounted it right up front. I just think this gadget looks so darn cool!

More complete assembly details to be coming soon. Posted by Picasa