Step 2) go to another store. Find fan you like much better. Buy that one. Step 3) hang fan most of the way. Step 4) dig up set of 50 inch replacement blades a friend gave me years ago. Step 5) mod blades to fit 42 inch fan brackets Step 6) finish hanging fan Step …
Continue reading “Step 1) buy the cheapest fan in the store”
http://www.thingiverse.com/thing:20147 I had to leave half way through the print, so I paused the job and powered down the heaters. The print finished ok when i powered the heaters back up, leaving a big blob where the nozzle had sat. Need to lift the nozzle off of the part or something. Last time I tried …
Continue reading “I printed some z wobble minimisers and installed them tonight”
Turned the heat off in pronterface and then flipped off the power supply. Anybody have any luck doing this? I am printing z wobble isolators with the last of my white PLA and don’t have enough to start over with. In album Shut the printer off at this point. Waiting to see how it works …
Continue reading “Trying to pause printing so i can leave the house”
I cut some PCB boards for a friend of mine tonight < http://dev.telynishiya.info/?p=63 >. The little band saw made quick work of them. I viced my belt sander and cleaned up the cuts so the boards look really good. Here are some photos from my 3d camera – you can look at 'em cross eyed …
It's been about a year since I picked them up. Katie had to come out and kick my butt to work on it. We need to get it done so we can move dressers around so the kids have the ones we currently have in our bedroom. Its a lot of work to sand the …
Continue reading “Finally got back to working on some old dressers I picked up on freecycle”
